Van-air-systems AC 140 to 220 Bedienungsanleitung PDF herunterladen

PRINTED IN THE U.S.A. PAGE 1

JULY 2005

REV. A

P/N 32-0226

INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS

AIR-COOLED AFTERCOOLER

FOR COMPRESSED AIR SYSTEMS

MODELS AC-140 thru AC-220

(ALL VOLTAGES)

WARNING

BEFORE STARTING INSTALLATION OR MAINTENANCE PROCEDURES, TURN OFF ELECTRICAL POWER AND COMPLETELY

DEPRESSURIZE THE UNIT. FAILURE TO HEED THIS WARNING MAY RESULT IN SERIOUS PERSONAL INJURY AND/OR DAMAGE TO

THE UNIT.

NEVER REMOVE, REPAIR, OR REPLACE ANY ITEM ON THIS UNIT WHILE IT IS UNDER PRESSURE.

WHEN INSTALLING THIS UNIT, ALWAYS COMPLY WITH THE NATIONAL ELECTRICAL CODE AND ALL OTHER APPLICABLE FEDERAL,

STATE AND LOCAL CODES.

NEVER OPERATE THIS AFTERCOOLER IF THERE IS A LEAK IN THE CORE. IMMEDIATELY TAKE THE UNIT OUT OF SERVICE AND FIX

OR REPLACE THE CORE.

NEVER OPERATE THE AFTERCOOLER ABOVE THE MAXIMUM RATED OPERATING CONDITIONS, AS OUTLINED IN SECTION 3.1.

NEVER REMOVE THE FAN GUARD WHILE THE AFTERCOOLER IS OPERATING. CONTACT WITH THE ROTATING FAN BLADE(S) MAY

RESULT IN SERIOUS PERSONAL INJURY.

DURING NORMAL OPERATION, THE INLET PIPING MAY REACH TEMPERATURES OF 150

F TO 400

F. CONTACT WITH THE PIPING MAY

RESULT IN SERIOUS PERSONAL INJURY.

1.1 HANDLING THE AFTERCOOLER

CAUTION

NEVER LIFT THE AFTERCOOLER BY THE CORE OR THE

INLET AND OUTLET.

WHEN MOVING OR LIFTING THE UNIT, PROTECT THE

CORE FROM ACCIDENTAL DAMAGE.

Take extreme care when unpacking, moving or installing. The core is

exposed. Damage to the core or fins may render the unit inoperable.

HANDLING INSTRUCTIONS SECTION 1

1.2 EQUIPMENT CHECK

Inspect the aftercooler for any damage that may have occured

during shipment. Inspect all items shipped with the unit.

IF THE UNIT HAS BEEN DAMAGED DURING SHIPMENT:

(1) Notify carrier immediately

(2) DO NOT operate the unit before consulting factory

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - AIR-COOLED AFTERCOOLER

PRINTED IN THE U.S.A. PAGE 1JULY 2005REV. AP/N 32-0226INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONSAIR-COOLED AFTERCOOLERFOR COMPRESSED AIR

Seite 2 - 3.1 SPECIFICATIONS

PAGE 2 PRINTED IN THE U.S.A.ASSEMBLY, LEG INSTALLATION SECTION 2MAXIMUM CAPACITY (SCFM)Rated capacities are based on the following conditions: Inlet a

Seite 3 - 4.2 MOUNTING THE UNIT

PRINTED IN THE U.S.A. PAGE 3SPECIFICATIONS AND DIMENSIONS SECTION 3INSTALLATION SECTION 44.1 LOCATIONCAUTIONDO NOT LOCATE THIS AFTERCOOLER WHERE PERSO

Seite 4 - 4.5 FREEZE PROTECTION

PAGE 4 PRINTED IN THE U.S.A.INSTALLATION SECTION 4MAXIMUM WORKING PRESSUREMODELAC-140 & AC-150AC-160 THRU AC-180AC-190 THRU AC-22070OF400 PSIG265

Seite 5 - 4.7 ELECTRICAL CONNECTIONS

PRINTED IN THE U.S.A. PAGE 5INSTALLATION SECTION 4FIGURE 4 SEPARATOR DETAILSAFTERCOOLERAC-140 & AC-150AC-160 thru AC-180AC-190 thru AC-220SEPARATO

Seite 6 - 5.3 REPAIRING LEAKS

PAGE 6 PRINTED IN THE U.S.A.5.3 REPAIRING LEAKSINSTALLATION SECTION 4FIGURE 5 WIRING DIAGRAM

Seite 7 - PRINTED IN THE U.S.A. PAGE 7

PRINTED IN THE U.S.A. PAGE 75.1 START UP INSTRUCTIONSPressurize the compressed air system. If the aftercooler wasinterlocked with the compressor, the

Seite 8 - 7.0 TROUBLESHOOTING

PAGE 8 PRINTED IN THE U.S.A.2950 Mechanic StreetLake City, PA 16423 USAPhone: 800/840-9906Corporate Fax: 814/774-0778Order Entry Fax: 814/774-34

Kommentare zu diesen Handbüchern

Keine Kommentare

Van-air-systems AC 140 to 220 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Van-air-systems AC 140 to 220 herunter. Van Air Systems AC 140 to 220 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Van-air-systems AC 140 to 220